Joking about postpress processing ------ "The Legend of the Condor Heroes"

In the world, what is the processing after printing?

Everything is afraid of the word "serious", including writing this article. Therefore, I would rather play it, so as not to carry too many heavy burdens.
Miss Li Mojun, who is infatuated with beauty and jealous, and seriously put forward the question of “when we come to the world, what is the situation, when we teach life and death”, isn’t our heart in a loss.
In the same way, when we seriously put forward what is meant by “pressing after printing”, regardless of the time being outside of the industry, how many people in the industry can accurately grasp its connotation and extension?
Professor Wei Ruiling's definition of post-press processing is: the production process that enables the printed product to obtain the required style and performance.
We often hear some print consumers complain about the printing factory: Didn't it say that it can be printed yesterday?
The reason for these misunderstandings may be that when the two sides talked about printing, they did not consider the post-press processing factors such as binding.
Post-press processing currently includes the following: folding, die-cutting, creasing, glazing, laminating, cutting, stapling, affixing (such as stamps), embossing, bronzing, crepe paper, gluing, pressing, piercing , code, etc. In short, it includes the surface finishing of binding and printing.
According to the survey, 80% of print jobs require post-press processing. This is especially true in the course of meeting customers' requests for new and updated products, especially in digital commercial printing.
Post-binding work plays an important role in printing. It determines the final appearance of the prints on the market. Today's post-press processing workshop leads to a foreigner who calls the “Aspirin Department” because Complex craftsmanship and messy procedures there cause headaches. The domestic post-press processing plant can be called the “Human Resources Department” because there can be the largest number of people in the printing industry.
Contradictions exist everywhere, or that the existence depends on contradictions. This is a bit mysterious, give some fresh examples.
The clever cooperation of the Quanzhen swordsmanship and the jade swordsmanship relied on the ambiguous mutual affection, such as the husband and wife's intellect, the power will be greatly reduced, and the ecstasy will not be displayed on the margins of separation from life and death.
"The combination of speed and relatively inexpensive equipment and advances in the workforce have increased the added value of products. Customers must pay attention to the cost of ink, paper and chemicals in the press room and the cost of film or media for the prepress shop. However, in the binding shop, most of the costs are labor. This view is more in line with the status quo in China, although foreigners have come up against foreign countries.
“The biggest problem in the post-press processing industry is the introduction of new equipment. In order to be at the forefront of the industry, it is necessary to introduce new equipment. Investment in this area is necessary. Regardless of the price issue, new machines are more efficient and easier to install. And the new equipment can be controlled by a computer, so that the system can be controlled very precisely, so that the amount of product mistakes can be strictly controlled." This is another foreign person's statement. Isn't it the same as the previous paragraph? We cannot give an answer. There may not be a unified standard answer.
The backwardness of domestic post-press processing has led to a lack of demand, which has caused manufacturers to rush to middle- and low-end products. The demand for high-end equipment of some developed manufacturers can only be met by foreign brands, so our post-press processing industry has always lagged behind. The circle of turmoil formed smoothly. Contradictory? This is the state of existence of the postpress industry in our country.

Yang Xiaoxia secretly shocked: "In the past 16 years, I have never used Xuan Tie-Epee. Today, I can take care of myself."
As a North Man, he ranks among the top five masters (according to the results of Huashan's latest evaluation of the sword). He once used Xuan Tie, Zhongjian Mountain in the town of Zengqin, and left Xuantie Epee. Yang Guo was still clasped.
The industry's understanding of the post-impression process is very different, but they agree with one point: Buying the most advanced and important equipment.
"Many people always think that bookbinding is not a money making tool, but a costly place," said Adam Robin of Manroland. In this part of the cost savings, it will rarely lead to increased production efficiency, on the contrary will lead to a disaster.
Postpress is a very cruel industry. Without good print quality, it is easily eliminated, but high-quality printing tends to be expensive. Companies can not buy new printing equipment, but must constantly upgrade equipment productivity. This requires a lot of money and time.
It will be a costly proposition to extend the service to special postpress services. Especially for those printers who sporadicly need such equipment. The machinery consumed many dollars (or more than 8 times RMB).

"You must know before and after, and you must be aware of the fact that there is no direction, and you have to be pre-emptive.
- Jueyuan ("Nine Yang Jing Jing" master)
I especially like to read old books and memorize those plausible words and come up with some messy conclusions. To be fair, there is some reference to it, especially for the Chinese on the land in China.
The prepress development is like a happy time. The desktop system has just completed the revolution in the printing industry and CTP has come one after another. Printing is also followed by CIP3 and CIP4.
However, some experts believe that the development of post-press equipment cannot take the path of computer control like the printing press. Digital printing and computer-to-plate (CTP) are the latest development technologies for printing presses, while post-press processing still uses existing technologies. And equipment, should be improved - at least to speed up its development. To achieve remarkable results in the mechanical automation of post-press processing, complex designs must be implemented. As mentioned earlier, a file can be directly printed on a computer using a computer, but it still requires a lot of manual work to get to a final product. For example, foiling and embossing machines have not changed much over the years. Of course, a variety of computer control devices can be added, but this is not important because manual processing is cheaper and problems are more easily solved.
Some people agree with the view that the future development trend is to minimize the time spent and increase the speed of operation through a short process flow. According to GHE's Brian Mickels, “Processing equipment after use often requires experience and skill. These techniques become unnecessary factors in the transition from subjective/repetitive operating environments to digital printing operations.
Both views are clearly not on the same level, and the latter’s view is based on the following: Because of the incredibly low unemployment rate that makes it difficult for companies to develop in the labor force, the new growth point can only come from increasing automation and Improve management methods.
I personally still admire this statement: The early birds have worms, but the early worms die. Whether it is equipment manufacturers or post-press processing plants, the key is to determine what level they belong to.

"The world is big,... Oh! I'm the frog..."
- Golden Wheel King

Prepress and postpress are not just connected to the process. Prepress people should also broaden their horizons and learn as much about post-press processing as possible.
"The development of computer technology has greatly increased the way of art design, but it has made post-press processing more difficult. Some of the problems could have been solved during the design process, and many post-press processors have had to spend a lot of time dealing with it. Most of these problems are due to the designer not considering the post-printing process in the design process, such as: it is difficult to mark the linen; the laser printer cannot output the letterhead with the gold foil, etc. Since the printing process is often printed The process is at a later stage, and it is impossible for the post-press industry and the designer to discuss these details."
The relationship between printing and India is also expanding.
Printers and binders are preparing to combine postal services with their processing technology. The system can also process stamps, stickers, and labels on a variety of materials.
The post-press processing industry itself must continue to improve. When the short cycle is closely linked with the concept of "one-step factory", when the post-press factory intends to meet all the needs of all customers or at least close to this goal.
For example, gilding personnel must constantly learn about the nature of metal foil and paper. There are often problems with the sturdiness of metal foils. For a new type of paper, the post-press processor must know which type of foil is suitable, which requires extensive experience. At the same time, other new technologies related to post-press processing may be available in the near future. They are characterized by very short readiness, short-run print-on-demand, and touch-screen digital postpress processing lines. There are also hot stamping machines and the like that can directly bronze the hard cover.




"But when you have a double edge, you can't kill him with 50 strokes?"
- Master Gongsungu
Leaving the blade, the martial arts book has lost its edge. The same applies to the postpress industry. Let us sample the basic tool in the processing of myopia, the paper cutter.
Paper cutters are very common, and some people think that it is only second only to the presses in the printing room. According to Marc Coulter, the marketing manager of Standard Duplicating Machines Corp., "Cutters are the soul of printing."
Many manufacturers already feel the prospect of CIP4, many have

Lates Series

Pet Toy,Dog Toy,Rubber Pet Toy

Cat Tree Pet Toy CO.,Ltd , http://www.chpetfood.com

This entry was posted in on